1980-81 YZ 125-250-465
-
-
-
-
1982-1990 Front Fender YZ Yellow
1982-1990 Front Fender YZ and IT 100/125/175/200/250/465/490 Yellow (will fit older models from 1979 and up)
-
1982-1990 Front Fender YZ White
1982-1990 Front Fender YZ and IT 100/125/175/200/250/465/490 White (will fit older models from 1979 and up)
-
-
-
-
-
1980-85 Rear fender YZ250-465-490 Yellow
1980-85 Rear Fender for YZ250 and
1980-81 YZ465 and 1982-85 YZ490 white
-
1980-85 Rear fender YZ250-465-490 White
1980-85 Rear Fender for YZ250 and
1980-81 YZ465 and 1982-85 YZ490 white
-
1980-81 Yamaha YZ 250/465 Plastic Fender kit and tank in Yellow
1980-81 Yamaha YZ 250/465 Plastic Fender kit and tank in Yellow inc
Front fender new style ,Sidepanel set ,Rear fender , Fuel Tank
You need a stock cap and petcock if you do not have it we sell it
The tank is the same size as a stock 250 tank will fit on the YZ465 and look really good
-
1980-81 Yamaha YZ 250/465 Plastic Fender kit and tank in White
1980-81 Yamaha YZ 250/465 Plastic Fender kit and tank in White inc
Front fender new style ,Sidepanel set ,Rear fender , Fuel Tank
you need a stock cap and petcock if you do not have it we sell it
The tank is the same size as a stock 250 tank will fit on the YZ465 and look really good
-
1980-81 Yamaha YZ 250/465 tank in yellow
80-81 Yamaha YZ 250/465 tank in yellow
it is the stock size from the 250 and will fit real nice on your YZ465
stock cap and petcock fill fit
-
1980-81 Yamaha YZ 250/465 Tank in White
1980-81 Yamaha YZ 250/465 tank in White
it is the stock size from the 250 and will fit reel nice on your YZ465
stock cap and petcock fill fit
-
-
-
-
-
Yamaha YZ Fuel petcock r
This is for the Yamaha petcock will com inc O-Ring
You NEED the washer for the 2 bolts it is steel and rubber-lined
( it will NOT seal whiz out it if you do not have it any more )
we recommend to replace it if you by a Fuel Tank
-
Yamaha YZ Fuel petcock rubber washer
This is for the Yamaha petcock a set of 2
You NEED the washer it is steel and rubber-lined ( it will NOT seal whiz out it )
we recommend to replace it if you by a Fuel Tank
and replace the old O-ring to we have for sale
-
Yamaha YZ Fuel petcock rubber O-Ring
This is for the Yamaha petcock
we recommend to replace O-Ring if you by a Fuel Tank
-
1980-81 YZ250 INTAKE MANIFOLD W/ BOOST BOTTLE
THIS ITEM WILL FIT 1980-81 YAMAHA YZ250 WITH BOOST BOTTLE WILL COME NEW ALUMINUM TUBE INSIDE
-
1980-81 YZ250 INTAKE MANIFOLD W/ BOOST BOTTLE
ITEM WILL FIT 1980/81 YAMAHA YZ250 WITH BOOST BOTTLE. YOU WILL NEED TO USE THE OEM HOSE WITH THIS MANIFOLD.
-
-
-
1978-1990 YZ125/250/400/490 CLUTCH LEVER
CLUTCH LEVER OEM STYLE
1978-1990 YZ125
1978-1990 YZ250
1979 YZ400
1980-1981 YZ465
1982-1990 YZ490
-
1978-1984 YZ125/250/400/490 FRONT BRAKE LEVER
FRONT BRAKE LEVER OEM STYLE
1978-1984 YZ125
1978-1984 YZ250
1979 YZ400
1980-1981 YZ465
1982-1984 YZ490
-
-
-
-
-
-
-
-
-
-
-
-
FORK SEALS 81-83 YZ125 77-80 YZ250/400/465
FORK SEAL KIT
1977-80 YZ250
1977-79 YZ400
1980 YZ465
1981-83 YZ125
-
-
-
1978-89 YZ125 1976-90 YZ250 HPI IGNITION
HPI IGNITION SYSTEM
1978-89 YZ125
1976-90 YZ250
1982-83 YZ100
77-79 YZ 125 owners measure your stock components. The OD on this stator plate measures 110mm. The small end of the crank taper should measure 11.40mm. You may need the earlier ignition depending on your engine specs.
The kit includes a stator, CDI, coil magneto, plug cap, and mounting hardware. This ignition has no lighting coils. It is for motocross use. HPI is the go to source for electronic ignitions for vmx and pvmx bikes.
These kits are universal applications. Some models may require you to drill larger mounting holes, sand a section of the mounting plate with a file to open up a slot or sand mounts down. Some bikes do required the use of extra gaskets under the ignition cover to make enough clearance for the stator. The magnetos do not have a keyway. You have to set the timing with a dial indicator and then torque down the crank nut. They stay in place once tightened. -
1980-81 YZ465 HPI IGNITION
HPI IGNITON SYSTEM
1980/81 YZ465
The kit includes a stator, CDI, coil magneto, plug cap, kill switch and mounting hardware. This ignition has no lighting coils. It is for motocross use. HPI is the go to source for electronic ignitions for vmx and pvmx bikes.
These kits are universal applications. Some models may require you to drill larger mounting holes, sand a section of the mounting plate with a file to open up a slot or sand mounts down. Some bikes do required the use of extra gaskets under the ignition cover to make enough clearance for the stator. The magnetos do not have a keyway. You have to set the timing with a dial indicator and then torque down the crank nut. They stay in place once tightened. -
CLUTCH KIT 1976-80 YZ125
CLUTCH KIT FIBERS, STEELS, SPRINGS
1976-80 YZ125
1976 MX125
1975 YZ175
1977-83 IT175
-
-
-
-
-
YZ125 '80 exhaust pipe
Yamaha YZ125 1980 exhaust pipe
this is really nice cone pipe and a really good power out put offer your stock pipe
-
YZ125 '80 exhaust silencer
Yamaha YZ125 1980 exhaust silencer
this is really nice cone pipe and a really good power out put offer your stock pipe
-
YZ125 '81 exhaust pipe
Yamaha YZ125 1981 exhaust pipe
this is really nice cone pipe and a really good power out put offer your stock pipe
-
YZ125 '81 exhaust silencer
Yamaha YZ125 1981 exhaust silencer
this is really nice cone pipe and a really good power out put over your stock pipe
-
-
out of stock YZ465 1980-81 exhaust pipe+silencer
Yamaha 1980-81 465 exhaust pipe+silencer
this is really nice cone pipe and a really good power out put over your stock pipe
-
Yamaha YZ 1977-up all models Wide Center mount foot peg
Yamaha YZ 1977-up all models Wide Center mount Pegs Set
like stock position, we have also rear mount pegs bring it back 1/2''
for some more foot space
These Pegs are designed for these specific motorcycles,
not a modified aftermarket late model Peg.
-
Yamaha YZ 1977-up all models Wide Rear mount foot peg
Yamaha YZ 1977-up all models Wide Rear mount Pegs Set
rear mount pegs bring it back 1/2''
for some more foot space
These Pegs are designed for these specific motorcycles,
not a modified aftermarket late model Peg.
-
Set of Springs for Wide Footpegs 1977-1982 All models YZ
Set of Springs for Wide Footpegs 1977-1982
All models YZ
-
-
-
-
-