1981-83 CR250
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
1983 CR250 PLASTIC KIT
1983 CR250 PLASTIC KIT INCLUDING DECALS.
KIT INCLUDES: FRONT FENDER, REAR FENDER, SIDE PANEL SET, NUMBER PLATE, AIR SCOOPS, AND DECALS
-
-
-
-
-
-
-
-
-
Side panel rubber exhaust
Side panel rubber like the OEM Honda to save your side panel to be burnt by the exhaust,
sold by the pice look on your panel how many you need
-
-
-
-
1981/1982 Honda CR 250-450/480
Seat Foam CR250-450/480 1981-82
is first class seat foam, not the cheap stuff, not too soft and not too hard. Made in the USA.
Fits perfect with our seat covers.
If you buy a cheap aftermarket seat cover it may not fit perfectly.
-
Seat Foam 1983 CR250
Seat Foam CR250 1983
is first class seat foam, not the cheap stuff, not too soft and not too hard. Made in the USA.
Fits perfect with our seat covers.
If you buy a cheap aftermarket seat cover it may not fit perfectly.
-
CRANK BEARING KIT 1981-83 CR250 1981 450 1982-83 480
These engine main bearing kits are made with modern materials and manufacturing techniques to ensure an as good or better than OEM fitment and performance. The high quality main bearings are made in Japan. The OEM part numbers are provided as a reference to ensure exact fitment. This kit includes the two main bearings and two oil seals to complete your build with ease. This main bearing kit will fit all Honda 1981-83 CR250, 1981 CR450 and CR480 1982-83 models.
- Complete Main Bearing Kit. Includes two bearings two crankshaft seals.
- Bearings / OE# 91009-HC0-003
- Seal / OE# 91201-KA4-004
- Seal / OE# 91203-444-003
- (Bearings Made in Japan)
-
OIL SEAL KIT 1981-83 CR250
The OEM part numbers are provided as a reference to ensure exact fitment and exactly what seals you will get so you know you are getting the correct replacement parts. This kit includes the oil seals for the crankshafts left/right, crankcase dust seal, kick starter seal, transmission seal, shift shaft seal, water pump seal with O-ring, transmission o-ring and oil cap O-ring. This oil seal kit will fit all 1981-83 Honda CR250 models.
- Crankshaft Seal / OE# 91201-KA4-004
- Crankshaft Seal / OE# 91203-444-003
- Crankcase Dust Seal / OE# 91251-964-000
- Kick Starter Oil Seal / OE# 91204-KF0-003
- Transmission Oil Seal / OE# 91207-ML3-003
- Shift Shaft Oil Seal / OE# 91206-286-013
- Water Pump Oil Seal / OE# 91201-965-000
- Transmission O-Ring / OE# 91201-430-003
- Oil Cap O-Ring / OE# 91303-800-000
- Water Pump O-Ring / OE# 91302-KA4-003
-
HPI IGNITION 1981-83 CR250
HPI IGNITION 1981-83 CR250
The kit includes a stator, CDI, coil magneto, plug cap, kill switch and mounting hardware. This ignition has no lighting coils. It is for motocross use. HPI is the go to source for electronic ignitions for vmx and pvmx bikes.
All warranty work needs to be done through HPI. We will help with the process as much as possible. Please note that if you have any failures, you may have to ship the part back to us for inspection. HPI offers a 30 day limited warranty against manufacturing defects. I have had them on various mx bikes with no issues.
These kits are universal applications. Some models may require you to drill larger mounting holes, sand a section of the mounting plate with a file to open up a slot or sand mounts down. Some bikes do required the use of extra gaskets under the ignition cover to make enough clearance for the stator. The magnetos do not have a keyway. You have to set the timing with a dial indicator and then torque down the crank nut. They stay in place once tightened. -
Intake Manifold for 1981 CR250-450 1982-83 CR250-480
Intake Manifold for 1981 CR250-450 1982-83 CR250-480
-
Top end gasket kit for 1981-82 CR250
Top end gasket kit for 1981-82 CR250, bore size 68mm
includes Base gasket and Head gasket.
-
1982-83 CR480 Air Filter
1982-83 CR480 Air Filter
Airfilters are pre-oiled from the factory; you
don't need to mess with it, just mount them! -
Simon Link for 1983 CR250-480
Simon Link for 1983 CR250-480 this part will improve
the suspension action tremendously. Included are
the 2 oval spacers which are needed to mount the link,
you need your original linkage bushings.
-
43MM FORK BOOTS BLACK
THESE ARE FORK BOOTS THAT WILL FIT 43MM FORKS. THE CHROME UPPER TUBE HAS TO BE 43MM.
-
43MM FORK BOOTS BLUE
THESE ARE FORK BOOTS THAT WILL FIT 43MM FORKS. THE CHROME UPPER TUBE HAS TO BE 43MM.
-
FRONT BRAKE CABLE 1981 CR250 1981 CR450
These all new front brake cables are made with modern materials and manufacturing techniques to ensure an as good or better than OEM fitment and performance. This high quality front brake cable is 1425mm long and the OEM part number is 45450-KA4-000 to ensure exact fitment. This front brake cable will fit all Honda 1981 CR250 and 1981 CR450 models.
-
CLUTCH PERCH CR
OEM STYLE CLUTCH PERCH HONDA 1981 CR450, 1982/83 CR480, 1983 CR250, 1984 THRU 1989 CR125/250/500
-
CLUTCH LEVER CR
CLUTCH LEVER FITS HONDA 1981 CR450, 1983 CR250, 1982/83 CR480, 1984-90 CR125, 1984-90 CR250, 1984-90 CR500
-
-
FRONT BRAKE LEVER CR
FRONT BRAKE LEVER FITS HONDA 1981-83 CR125, 1981-82 CR250, 1981 CR450, 1982-83 CR480, 1983 CR250
-
-
-
-
CR250 1981 Wide Foot Pegs Set
CR250 1981 Wide Foot Pegs Set
These Pegs are designed for these specific
motorcycles, not a modified aftermarket
late model Peg.
-
CR 1983 Wide Foot Pegs Set
CR125 - 250 - 480 1983 Wide Foot Pegs Set
These Pegs are designed for these specific
motorcycles, not a modified aftermarket
late model Peg. 10mm pin Not inc
-
CR250 1982 Wide Foot Pegs Set
CR250 1982 Wide Foot Pegs Set
These Pegs are designed for these specific
motorcycles, not a modified aftermarket
late model Peg.
-
-
-
-
CR250 1983 Pipe
CR250 1983 Pipe Vmx pipe Made by Proform
need stock radiator some aftermarket radiator are to long
-
-
-
-
-
Chain Roller Set black for 1981
YOU are buying ONE Chain Roller black for 1981 CR125-250-450 you get ONE roller only for the 1981
-
-
Rear Chainguide, incl. rubblock black for 1982 CR125-250-480
Rear Chainguide, incl. rubblock black for 1982 CR125-250-480
-
Rear Chain guide, incl. rub block black for 1983 CR250-480
Rear Chainguide, incl. rubblock black for 1983 CR250-480
-
Splash Guard black for right hand chain drive 1982 cr125-250-480 1983 CR250-480
Splash Guard black for right hand chain drive 1982 cr125-250-480 1983 CR250-480
-
-
-
-
-
Rear Brake Shoes CR125-250-480 1983-84-85
CR125 1984-85 CR2501983-84-85 CR480-500 1983-84-85 Rear Brake Shoes
-
steering brg kit cr82-89
steering hat Bearing kit for
CR125-250 from 1982-89
CR450-480 from 81-83
CR500 84-89
XR 200 81-02
XR250 91-96
XR350 83-85
XR500 81-84
XR600 85-00
-
Front wheel bearing set for CR250 1982-83
Front wheel bearing set high quality bearing and seals for
CR250 1982-83
-
Rear wheel bearing set for CR250 1982
Rear wheel bearing set high quality bearing and seals for
CR250 1982
-
Rear wheel bearing set for CR250 1983
Rear wheel bearing set high quality bearing and seals for
CR250 1983
-
-
Spray paint vmx red
Spray paint vmx red, which is the same color as the
vmx plastics
Sorry, but we cannot ship paint via air internationally
-
Tahitian Red Spray Paint
Acrylic Enamel: Tahitian Red Spray Paint like the OEM color for
(CR & XR75)
For most 77-82 CR & 75-76 XR 75 models and more xr models check
your dealer
-
Orange Spray Paint
VMX Orange Acrylic Enamel: Exact color copy for original OEM Honda
The Orange Spray Paint is for the year models 1983/87
And also for the Honda XR year models 1983-2000
-
-
-
-
-