1979-83 CR125
-
1978-80 CR250 1979 CR125 FOX SHOCKS 17.5"
WILL FIT THE FOLLOWING
1978-80 CR250
1979 CR125
VintCo Air Shocks are an exact duplicate of the original air shocks so popular in the late 1970’s. Just like the originals, our air shocks are adjustable with two chambers, high and low pressure, giving you tremendous flexibility for setting your bike’s suspension exactly as desired. No more trying to find unobtanium springs to match your weight. The VintCo Air Shocks come assembled and ready for installation-just add air or nitrogen. Remember, like the originals, some modifications may be required to install on your specific dirt bike (various bushings are supplied). These new air shocks are fully rebuildable with VintCo rebuild kits and all shocks are hand assembled in the USA. Includes manual and spacers with all new components.
- Distance Center to Center 17.551 (inch) 445.8mm
- Travel 5.880 (inch) 149.4mm
- Collapsed Length 11.669 (inch) 296.4mm
- Warning: Shocks comes without air when shipped you will need to add Air / Nitrogen to set up sag properly.
- Pair of complete air shocks 17.5"
- 4 Cap Reducer Bushings 10x12x16.5mm
- VintCo Owners Manual
- Assembled in USA
- All new High Quality components
- Fully Rebuildable
- Customizable for many models
- Same design as 1970’s Air Shocks
-
-
1981 CR125 SEAT COVER
1981 CR125 SEAT COVER BLACK. IT HAS THE HONDA LOGO ON THE BACK AND 125R ON THE SIDES
-
-
-
-
-
-
Front Fender Red
Front Fender Red
The Front Fender has the same shape as a Preston Petty Baja Fender, it also has the same shape
as a Johnny O fender.
Front to back 30 inch, 10-1/4 high and 4-1/2 inch wide.
-
-
-
-
-
-
-
-
-
-
-
1979 cr125 complete body kit
Honda cr125 1979 complete Body kit
inc front fender rear fender in red
side panel set and front number plate in red
side panel decals and tank decals
air box cover sold separately
-
1980 cr125 complete body kit
Honda cr125 1980 complete Body kit
inc front fender rear fender in red
side panel set and front number plate in red
side panel decals and tank decals
air box cover sold separately
-
Honda 83 125 plastic kit
Honda CR125 1983 plastic kit front fender ,rear fender ,side panel set ,tank shrouds , front number plate decal set
All in nice and shiny plastic
-
-
1983 CR125 set radiator scoop orange
1983 CR125 set radiator scoop orange
All in nice and shiny plastic
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
CR1979-80 Front Number Plate Bracket
CR1979-80 Front Number Plate Bracket + cable guide + hardware to mount
-
-
-
Grippy Seatcover1978-80 CR125
Grippy Seatcover for all the racers among you.
Fit 1978-80 CR125 seatfoam Honda Logo on back in White. Nothing on side
$59.95
-
Seat Foam79/80 cr125
Seat Foam cr125 1979/80 stock hight
is first class seat foam, not the cheap stuff, not too soft and not too hard. Made in the USA.
Fits perfect with our seat covers.
If you buy a cheap aftermarket seat cover it may not fit perfectly.
-
Seat Foam 1983 CR125
Seat Foam 1983 CR125
is first class seat foam, not the cheap stuff, not too soft and not too hard. Made in the USA.
Fits perfect with our seat covers.
If you buy a cheap aftermarket seat cover it may not fit perfectly.
-
-
CONNECTING ROD KIT 1979 CR125
All new Heavy Duty Connecting Rod kits for your Honda 1979 CR125cc machines that will get you back on track. These Connecting Rod kits will save you money over a new crankshaft. This Connecting rod kit fits all Honda CR125 1979. rods kits are manufactured with Heavy Duty Forged Steel and made with modern materials and manufacturing techniques to ensure an as good or better than OEM fitment and performance. Kit includes a rod, crank pin, big end bearing, wrist pin bearing, and two thrust washers.
- 1 Heavy Duty Forged Steel Connecting Rod
- OE# 13201-KA3-740
- 1 Crank Pin 12x22x53mm
- 1 Big end bearing 22x28x16mm
- 1 Wrist pin bearing 14x18x20mm
- 2 Thrust washers 22x35x1mm
THIS IS A GENERIC PICTURE OF THE ITEM. YOU CONNECTING ROD WILL LOOK JUST LIKE THE OEM ONE.
-
CONNECTING ROD KIT 1980-84 CR125
All new Heavy Duty Connecting Rod kits for your Honda 1980-84 CR125cc machines that will get you back on track. These Connecting Rod kits will save you money over a new crankshaft. This Connecting rod kit fits all Honda CR125’s 1980-84 . rods kits are manufactured with Heavy Duty Forged Steel and made with modern materials and manufacturing techniques to ensure an as good or better than OEM fitment and performance. Kit includes a rod, crank pin, big end bearing, wrist pin bearing, and two thrust washers.
- 1 Heavy Duty Forged Steel Connecting Rod
- OE# 13201-KA3-740
- 1 Crank Pin 12x22x54mm
- 1 Big end bearing 22x28x16mm
- 1 Wrist pin bearing 14x18x20mm
- 2 Thrust washers 22x35x1mm
THIS IS A GENERIC PICTURE OF THE ITEM. YOU CONNECTING ROD WILL LOOK JUST LIKE THE OEM ONE.
-
CRANK BEARING KIT 1979 CR125
These engine main bearing kits are made with modern materials and manufacturing techniques to ensure an as good or better than OEM fitment and performance. The high quality main bearings are made in Japan. The OEM part numbers are provided as a reference to ensure exact fitment. This kit includes the two main bearings and two oil seals to complete your build with ease. This main bearing kit will fit all Honda 1979 CR125 models.
- Complete Main Bearing Kit. Includes two bearings two crankshaft seals.
- Bearings / OE# 91002-444-000
- Seal / OE# 91203-444-003
- Seal / OE# 91204-444-005
- (Bearings Made in Japan)
-
CRANK BEARING KIT 1980-85 CR125
These engine main bearing kits are made with modern materials and manufacturing techniques to ensure an as good or better than OEM fitment and performance. The high quality main bearings are made in Japan. The OEM part numbers are provided as a reference to ensure exact fitment. This kit includes the two main bearings and two oil seals to complete your build with ease. This main bearing kit will fit all Honda 1980-85 CR125 models.
- Complete Main Bearing Kit. Includes two bearings two crankshaft seals.
- Bearings / OE# 91002-KY4-901
- Seal / OE# 91203-KS6-004
- Seal / OE# 91204-444-005
- (Bearings Made in Japan)
-
OIL SEAL KIT 1979 CR125
These engine oil seal kits are made with modern materials and manufacturing techniques to ensure an as good or better than OEM fitment and performance. These engine oil seal kits will help to complete your build with ease. The OEM part numbers are provided as a reference to ensure exact fitment and exactly what seals you will get so you know you are getting the correct replacement parts. This kit includes the oil seals for the crankshafts left/right, crankcase oil seal, clutch lifter seal, right crankcase cover, shift shaft, and oil cap O-ring. This oil seal kit will fit all 1979 Honda CR125 models.
- Crankshaft Seal / OE# 91204-444-005
- Crankshaft Seal / OE# 91203-444-003
- Crankcase Oil Seal / OE# 91201-360-005
- Clutch Lifter Oil Seal / OE# 91202-444-023
- Right Crankcase Cover Oil Seal / OE# 91204-259-003
- Shift Shaft Oil Seal / OE# 91206-286-013
- Oil Cap O-Ring / OE# 91303-800-000
-
OIL SEAL KIT 1980 CR125
These engine oil seal kits are made with modern materials and manufacturing techniques to ensure an as good or better than OEM fitment and performance. These engine oil seal kits will help to complete your build with ease. The OEM part numbers are provided as a reference to ensure exact fitment and exactly what seals you will get so you know you are getting the correct replacement parts. This kit includes the oil seals for the crankshafts left/right, crankcase oil seal, clutch lifter seal, right crankcase cover seal, shift shaft seal, and oil cap O-ring. This oil seal kit will fit all 1980 Honda CR125 models.
- Crankshaft Seal / OE# 91204-444-005
- Crankshaft Seal / OE# 91203-KS6-004
- Crankcase Oil Seal / OE 91201-360-005
- Clutch Lifter Oil Seal / OE# 91202-444-023
- Right Crankcase Cover Oil Seal / OE# 91204-259-003
- Shift Shaft Oil Seal / OE# 91206-286-013
- Oil Cap O-Ring / OE# 91303-800-000
-
OIL SEAL KIT 1981-82 CR125
These engine oil seal kits are made with modern materials and manufacturing techniques to ensure an as good or better than OEM fitment and performance. These engine oil seal kits will help to complete your build with ease. The OEM part numbers are provided as a reference to ensure exact fitment and exactly what seals you will get so you know you are getting the correct replacement parts. This kit includes the oil seals for the crankshafts left/right, crankcase oil seal, clutch lifter seal, right crankcase cover seal, shift shaft seal, water pump seal with O-ring and oil cap O-ring. This oil seal kit will fit all 1981-82 Honda CR125 models.
- Crankshaft Seal / OE# 91204-444-005
- Crankshaft Seal / OE# 91203-KS6-004
- Crankcase Oil Seal / OE# 91202-KJ9-003
- Clutch Lifter Oil Seal / OE# 91202-444-023
- Right Crankcase Cover Oil Seal / OE# 91204-259-003
- Shift Shaft Oil Seal / OE# 91206-286-013
- Water Pump Oil Seal / OE# 91201-965-000
- Oil Cap O-Ring / OE# 91303-800-000
- Water Pump O-Ring / OE# 91302-KA4-003
-
-
-
-
1979 CR125 complete gasket kit
1979 CR125 complete gasket kit, all parts in the picture included (headgasket has 6 holes)
-
1979 CR125 High Quality Top End incl. head gasket (6 holes for 1979)
1979 CR125 High Quality Top End incl. head gasket
(6 holes for 1979)
-
1980 CR125 High Quality Top End incl. head gasket with 4 holes.
1980 CR125 High Quality Top End incl. head gasket with 4 holes.
-
1980 CR125 High Quality complete gasket kit
1980 CR125 High Quality complete gasket kit ; make sure
your 1980 has NO Dial pins (4 holes as in picture), if it has
Dial pins you need the 1979 headgasket (with 6 holes) please
make a note when you order.
-
-
Clutch Fiber Disc set (6) for 1983 CR125
Clutch Fiber Disc set (6) for 1983 CR125
These clutch plates are as close as you can get it
to MOE and not some Chinese clutch plates.
-
HPI IGNITION 1979-85 CR125
Fits the following models: 1979-1985 Honda CR 125
The kit includes a stator, CDI, coil magneto, plug cap, kill switch and mounting hardware. This ignition has no lighting coils. It is for motocross use. HPI is the go to source for electronic ignitions for vmx and pvmx bikes. The most affordable vmx ignition system that you will find. Yes, they last just as long as all of the other electronic ignition systems on the market today. All warranty work needs to be done through HPI. We will help with the process as much as possible. Please note that if you have any failures, you may have to ship the part back to us for inspection. HPI offers a 30 day limited warranty against manufacturing defects. I have had them on various mx bikes with no issues.
These kits are universal applications. Some models may require you to drill larger mounting holes, sand a section of the mounting plate with a file to open up a slot or sand mounts down. Some bikes do required the use of extra gaskets under the ignition cover to make enough clearance for the stator. The magnetos do not have a keyway. You have to set the timing with a dial indicator and then torque down the crank nut. They stay in place once tightened.
-
HPI CDI 1979 1980 CR125
1979/1980 Honda CR 125 OEM Replica HPI CDI. Replaces OEM part numbers 30400-444-003 / 30400-466-000
-
1979-80 CR125 Air Filter
1979-80 CR125 Air Filter $21.95
Airfilters are pre-oiled from the factory; you
don't need to mess with it, just mount them! -
1982-83 CR480 Air Filter
1982-83 CR480 Air Filter
Airfilters are pre-oiled from the factory; you
don't need to mess with it, just mount them! -
-
-
Front Chain Slider black for 1983-84 CR125/250/500
Front Chain Slider black for 1983 CR125 and 1984 CR125-250-500
-
-
-
-
Rear Chainguide, incl. rubblock black for 1982 CR125-250-480
Rear Chainguide, incl. rubblock black for 1982 CR125-250-480
-
Rear Chain Guide for 1983 -CR125 1984 125-250-500
Rear Chain Guide, incl. rubber block black for CR125 1983 and 1984 CR250
-
Splash Guard black for right hand chain drive 1982 cr125-250-480 1983 CR250-480
Splash Guard black for right hand chain drive 1982 cr125-250-480 1983 CR250-480
-
-
-
Chain Roller Set black for 1981
YOU are buying ONE Chain Roller black for 1981 CR125-250-450 you get ONE roller only for the 1981
-
-
CR125 1979 Wide Foot Pegs Set
CR125 1979 Wide Foot Pegs Set
These Pegs are designed for these specific
motorcycles, not a modified aftermarket
late model Peg.
-
CR125 1980 Wide Foot Pegs Set
CR125 1980 Wide Foot Pegs Set
These Pegs are designed for these specific
motorcycles, not a modified aftermarket
late model Peg.
-
CR125 1981 Wide Foot Pegs Set
CR125 1981 Wide Foot Pegs Set
These Pegs are designed for these specific
motorcycles, not a modified aftermarket
late model Peg.
-
CR125 1982 Wide Foot Pegs Set
CR125 1982 Wide Foot Pegs Set
These Pegs are designed for these specific
motorcycles, not a modified aftermarket
late model Peg.
-
CR 1983 Wide Foot Pegs Set
CR125 - 250 - 480 1983 Wide Foot Pegs Set
These Pegs are designed for these specific
motorcycles, not a modified aftermarket
late model Peg. 10mm pin Not inc
-
-
FRONT BRAKE CABLE 1979 CR125 1978-80 CR250
These all new front brake cables are made with modern materials and manufacturing techniques to ensure an as good or better than OEM fitment and performance. This high quality front brake cable is 1370mm long and the OEM part number is 45450-467-000 to ensure exact fitment. This front brake cable will fit all Honda 1979 CR125 and 1978-80 CR250 models.
-
FRONT BRAKE CABLE 1981 CR125
These all new front brake cables are made with modern materials and manufacturing techniques to ensure an as good or better than OEM fitment and performance. This high quality front brake cable is 1415mm long and the OEM part number is 45450-KA3-000 to ensure exact fitment. This front brake cable will fit all Honda 1981 CR125 models
-
CLUTCH CABLE 1979-80 CR125
These all new clutch cables are made with modern materials and manufacturing techniques to ensure an as good or better than OEM fitment and performance. The high quality clutch cable is 1195mm long and the OEM part number is 22870-466-000 to ensure exact fitment. This clutch cable will fit all Honda 1979-80 CR125 models
-
FRONT BRAKE LEVER CR
FRONT BRAKE LEVER FITS HONDA 1981-83 CR125, 1981-82 CR250, 1981 CR450, 1982-83 CR480, 1983 CR250
-
FRONT BRAKE LEVER CR
FRONT BRAKE LEVER FITS HONDA 1974-78 CR125, 1979-80 CR125, 1973-76 CR250, 1978-80 CR250
-
-
-