1974-78 125 Elsinore +mr175
-
-
-
-
-
Front Fender Red
Front Fender Red
The Front Fender has the same shape as a Preston Petty Baja Fender, it also has the same shape
as a Johnny O fender.
Front to back 30 inch, 10-1/4 high and 4-1/2 inch wide.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Honda Fender kit white 1974/75 125
1974/75 Kit in nice shine White inc
Front fender Rear fender Side panel set Front number plate Decal set
-
Honda Fender kit Red 1976-77-78 125
1976-77-78 Kit in nice shine Red inc
Front fender Rear fender Inner fender Side panel set Front number plate Decal set
-
-
-
-
-
-
-
1974-76 125-250 Side Plates Rubber strap set
Elsinor 125 1974-75 250 75-76 Side Plates Rubber strap set off 2
-
-
mud flap with CR logo
Black rubber, high quality mud flap with CR logo (like the originals were)
It is tapered thin up front thicker where it mounts Not like the cheap other ones for sale
-
elsinore Front Number Plate Bracket + cable guide + hardware to mount [ clone ]
Elsinore Front Number Plate Bracket + cable guide + hardware to mount
-
-
1974-78 CR125 Wide Foot Pegs Set
1974-78 CR125 Wide Foot Pegs Set
These Pegs are designed for these specific
motorcycles, not a modified aftermarket
late model Peg.
-
-
-
Seat Foam Elsinore 74/75cr125
Seat Foam elsinore 125 74/75 stock hight
is first class seat foam, not the cheap stuff, not too soft and not too hard. Made in the USA.
Fits perfect with our seat covers.
If you buy a cheap aftermarket seat cover it may not fit perfectly.
-
Seat Foam Elsinore 76/78cr125
Seat Foam elsinore 125 76-78 stock hight 1" higher than the 1974-75
can be used on the 1974-75 if you by the 76-77 seat cover to
is first class seat foam, not the cheap stuff, not too soft and not too hard. Made in the USA.
Fits perfect with our seat covers.
If you buy a cheap aftermarket seat cover it may not fit perfectly.
-
CR125 1974-1975-1976-1977-1978 Gasket set
Top Quality Gasket set and Correct fitments
CR125 1974-1975-1976-1977-1978 Gasket set $59.95
-
CR125 1974-75-76-77-78 Head Gasket set
Top Quality Head Gasket set and Correct fitments
CR125 1974-1975-1976-1977-1978 Head Gasket set
-
CRANK BEARING KIT 1974-78 CR125
These engine main bearing kits are made with modern materials and manufacturing techniques to ensure an as good or better than OEM fitment and performance. The high quality main bearings. The OEM part numbers are provided as a reference to ensure exact fitment. This kit includes the two main bearings and two oil seals to complete your build with ease. This main bearing kit will fit all Honda 1974-78 CR125
- Complete Main Bearing Kit. Includes two bearings two crankshaft seals.
- Bearing / OE# 91002-360-005
- Bearing / OE# 91002-KY4-901
- Seal / OE# 91204-360-003
- Seal / OE# 91203-360-003
-
OIL SEAL KIT 1974-78 CR125
These engine oil seal kits are made with modern materials and manufacturing techniques to ensure an as good or better than OEM fitment and performance. These engine oil seal kits will help to complete your build with ease. The OEM part numbers are provided as a reference to ensure exact fitment and exactly what seals you will get so you know you are getting the correct replacement parts. This kit includes the oil seals for the crankshafts left/right, crankshaft oil seal, clutch lever seal, right crankcase cover, shift shaft, clutch cap O-ring, oil cap O-ring, and cylinder O-ring. This oil seal kit will fit all Honda 1974-78 CR125,
- Crankshaft Seal / OE# 91204-360-003
- Crankshaft Seal / OE# 91203-360-003
- Crankshaft Oil Seal / OE# 91201-360-005
- Clutch Lever Oil Seal / OE# 91204-KE8-003
- Right Crankcase Cover Oil Seal / OE# 91204-259-003
- Shift Shaft Oil Seal / OE# 91206-286-013
- Clutch Cap O-Ring / OE# 91302-KG4-003
- Oil Cap O-Ring / OE# 91303-800-00
- Cylinder O-Ring only for 74 / OE# 91311-329-000
-
CLUTCH KIT 1974-78 CR125
Clutch kits are made with modern materials and manufacturing techniques to ensure an as good or better than OEM fitment and performance. Our clutch cork friction plates are infused with aluminum particles designed to ensure smooth power delivery and fade-free performance. steel clutch plates won't expand and do not fade like aluminum clutch plates. The clutch springs are heat treated for maximum life. The OEM part numbers are provided as a reference to ensure exact fitment. This is an OEM quality drop-in clutch plate kit that fits all Honda 1974-78 CR125 and 1975-77 MR175 models.
- 5 Steel Plates / OE# 22321-360-000
- 6 Friction Plates / OE# 22201-360-306
- 6 Springs / OE# 22401-360-700
- Clutch cork friction plates are infused with aluminum particles designed to ensure smooth power delivery and fade free performance. Clutch plates made of steel-steel plates won't expand and do not fade like aluminum plates. Clutch springs are heat treated for maximum life.
-
KICK STARTER RETURN SPRING 1974-78 CR125
This vintage Honda 125 engine had a problematic kick starter return spring.
The reproduction kick starter return springs are made with modern materials and manufacturing techniques to ensure an as good or better than OEM fitment and performance. The OEM springs can be prone to breaking and have been very hard to find until now. we have solved the dilemma of these unobtainable springs. The OEM part number is 28261-360-000 so you can ensure an exact fitment. This kick starter return spring fits all Honda 1974-78 CR125
- Reproduction Kick Starter Return Spring
- OE# 28261-360-000
-
HPI IGNITION 1974-78 CR125
HPI IGNITION FOR 1974-78 CR125
The kit includes a stator, CDI, coil magneto, plug cap, kill switch and mounting hardware. This ignition has no lighting coils. It is for motocross use. HPI is the go to source for electronic ignitions for vmx and pvmx bikes.
All warranty work needs to be done through HPI. We will help with the process as much as possible. Please note that if you have any failures, you may have to ship the part back to us for inspection. HPI offers a 30 day limited warranty against manufacturing defects. I have had them on various mx bikes with no issues.
These kits are universal applications. Some models may require you to drill larger mounting holes, sand a section of the mounting plate with a file to open up a slot or sand mounts down. Some bikes do required the use of extra gaskets under the ignition cover to make enough clearance for the stator. The magnetos do not have a keyway. You have to set the timing with a dial indicator and then torque down the crank nut. They stay in place once tightened. -
Intake Manifold for Stock Keihin Carburetor for 1974-75 CR125
Intake Manifold for Stock Keihin Carburetor
for 1974-75 CR125
-
Intake Manifold for Stock Keihin Carburetor 76-78 CR125
Intake Manifold for Stock Keihin Carburetor
for 1976-78 CR125
-
Intake Manifold for 30-34 mm Mikuni Carburetor
Intake Manifold for 30-34 mm Mikuni Carburetor
for 1974-78 CR125
-
Air Intake Boot for Stock Keihin Carburetor 1974-75 CR125
Air Intake Boot for Stock Keihin Carburetor
for 1974-75 CR125
-
Air Intake Boot for 30-34 mm Mikuni Carburetor for 1974-75 CR125
Air Intake Boot for 30-34 mm Mikuni Carburetor
for 1974-75 CR125
-
Air Intake Boot for stock kehin Carburetor 1976-78 CR125
Air Intake Boot for stock kehin Carburetor
for 1976-78 CR125
-
Air Intake boot for 1976-78 CR125 for Mikuni Carburetor 30-34 mm
Air Intake boot for 1976-78 CR125 for Mikuni Carburetor
30-34 mm
-
REAR BRAKE CABLE 1975-78 CR125
These all new rear brake cables are made with modern materials and manufacturing techniques to ensure an as good or better than OEM fitment and performance. This high quality rear brake cable is 615mm long and the OEM part number is 43450-400-000 to ensure exact fitment. This rear brake cable will fit all Honda 1975-78 CR125
THIS IS A GENERIC PICK OF A CABLE. THE CABLE YOU WILL GET LOOKS JUST LIKE THE OEM CABLE
-
REAR BRAKE CABLE 1974 CR125
These all new rear brake cables are made with modern materials and manufacturing techniques to ensure an as good or better than OEM fitment and performance. This high quality rear brake cable is 600mm long and the OEM part number is 43450-360-000 to ensure exact fitment. This rear brake cable will fit all Honda 1974 CR125 models
THIS IS A GENERIC PICK OF A CABLE. THE CABLE YOU WILL GET LOOKS JUST LIKE THE OEM CABLE
-
FRONT BRAKE CABLE 1975 CR125
These all new front brake cables are made with modern materials and manufacturing techniques to ensure an as good or better than OEM fitment and performance. This high quality front brake cable is 1250mm long and the OEM part number is 45450-361-000 to ensure exact fitment. This front brake cable will fit all Honda 1975 CR125
-
CLUTCH CABLE 1976-78 CR125
These all new clutch cables are made with modern materials and manufacturing techniques to ensure an as good or better than OEM fitment and performance. The high quality clutch cable is 1185mm long and the OEM part number is 22870-KB4-000 to ensure exact fitment. This clutch cable will fit all Honda 1976-78 CR125 models
-
CLUTCH CABLE 1974-75 CR125
These all new clutch cables are made with modern materials and manufacturing techniques to ensure an as good or better than OEM fitment and performance. The high quality clutch cable is 1210mm long and the OEM part number is 22870-373-405 to ensure exact fitment. This clutch cable will fit Honda 1974-75 CR125,
-
-
-
FRONT BRAKE LEVER CR
FRONT BRAKE LEVER FITS HONDA 1974-78 CR125, 1979-80 CR125, 1973-76 CR250, 1978-80 CR250
-
-
GAS CAP 1974-1978 CR125 1973-1976 CR250
THIS PLASTIC GAS CAP WILL FIT YOUR STOCK TANK FOR THE FOLLOWING
1974-78 CR125
1973-76 CR250
-
-
-
steering brg kit cr-xr 70-125
steering hat Bearing kit for
CR125 from 1974-78
XR 70 -75 - 80 From 1973-90
-
74 125 Elsinore Air Filter
74 125 Elsinore Air Filter
Airfilters are pre-oiled from the factory; you
don't need to mess with it, just mount them! -
1975125 Elsinore Air Filter
1975 125 Elsinore Air Filter
Airfilters are pre-oiled from the factory; you
don't need to mess with it, just mount them! -
1976-78 125 Elsinore Air Filter
1976-78 125 Elsinore Air Filter
Airfilters are pre-oiled from the factory; you
don't need to mess with it, just mount them! -
-
-
-
-
1974/75 125 proform pipe build in silencer
1974/75 125 proform pipe build in silencer
replaceable packing it will give your bike more
usable horsepower and a good look/fit
-
76-77-78 125 proform pipe build in silencer
76-77-78 125 proform pipe build in silencer
replaceable packing it will give your bike more
usable horsepower and a good look/fit
-
Spray paint vmx red,
Spray paint vmx red, which is the same color as the
vmx plastics,
Sorry, but we cannot ship paint via air internationally, or here in the US.
-
Tahitian Red Spray Paint
Acrylic Enamel: Tahitian Red Spray Paint like the OEM color for
(CR & XR75)
For most 77-82 CR & 75-76 XR 75 models and more xr models check
your dealer
-
-
-
-
-